Pica P505 Extra-Strong Graffiti Protection 10 L
Pica P505 is a wax- and water-based graffiti protection product that effectively protects against most types of spray paint, brush paint, marker and Tectyl graffiti. This graffiti protection is what is known as sacrificial protection, which means that the surface must be protected again after graffiti removal, as the protective layer disappears completely or partially during the cleaning process. P505 graffiti remover forms a protective film and prevents graffiti paint from penetrating the substrate. As a result, shadowing and wear on the substrate are significantly reduced compared with cleaning using graffiti removal chemicals. The difference becomes clear after several treatments, as a surface from which graffiti is removed without graffiti protection will suffer considerably more wear.
Use:
Begin by thoroughly cleaning the surface to be treated, removing graffiti or other contaminants such as soot, dirt, traffic film, etc. Spray on an even layer of P505 graffiti protection, working from the bottom upwards. For even better protection, an additional layer can be applied once the first layer is touch-dry. Make sure to apply a completely covering layer to achieve full protection.
If you want to remove graffiti from an already protected surface, use a high-pressure washer at approximately 40-50 bar and a water temperature of approximately 70-80 °C. Then re-protect the surface with one or two layers of Pica P505 graffiti protection.
Coverage:
Varies depending on the surface, but expect the following consumption for two layers:
Painted surfaces, natural stone: 0.1 litre per m2.
Concrete/brick: 0.15 litre per m2.
Render: 0.2 litre per m2.