Pica P500 Graffiti Protection 10 L.
Wax-based and water-based graffiti protection agent that effectively protects against most types of spray, brush, marker and Tectyl graffiti. When using the product, the surface must be re-protected after any graffiti removal, as the protective layer will disappear either partially or completely during cleaning. PICA P500 forms a protective film that prevents graffiti paints from penetrating the substrate. This significantly reduces the risk of shadowing and wear on the substrate compared with removal using graffiti-cleaning chemicals. This difference becomes more noticeable after repeated cleaning, as a surface cleaned of graffiti without graffiti protection will suffer significantly greater wear.
The product can be used on most types of mineral surfaces.
The best results are achieved at a facade surface temperature of between +5-+40 °C.
Avoid using the product at surface temperatures below +5 °C.
Instructions for use:
Application
- Thoroughly clean the surface to be treated to remove graffiti and other contaminants such as soot, dirt, traffic film, etc.
- Spray on an even coat of PICA P500. Work from the bottom upwards. Apply a second coat when the first coat is touch-dry.
The surface is now effectively protected. NOTE: Ensure that the coat is completely covering the surface to achieve full protection.
Graffiti removal
- Remove the graffiti using high-pressure washing. Use a pressure of approximately 40-50 bar and a water temperature of approximately 70-80 °C. Try several times to achieve the best result.
- Re-protect with one to two coats of PICA P500.
Consumption varies depending on the condition of the surface, but the following normal consumption applies for two coats;
Painted surfaces, natural stone: 0,20L/m2
Concrete/brick: 0,30L/m2
Render: 0,4L/m2
Working solution: Concentrate (pH 8,5).
The product is not subject to labelling requirements.
Store frost-free in the closed original container
Contents: 10 litres